|
No extra charges for credit cards!
These work on any M82 or M107 that have the 3 piece sear assembly in
them as shown here
I have come up with a way to give the Barrett M82 and
M107
triggers a smoother and lighter trigger pull.
You can buy these parts from me and follow the directions
below to install them yourself.
The price of the parts is
$400 without exchange.
$250 with exchange.
If you want to exchange your old parts you will be
charged $400 at time of purchase and will receive $150 back when we
receive your parts back.
If you are not 100% happy with the
difference it makes simply send the parts back and pay only $10 to cover
shipping!
The parts are factory Barrett parts that I have had
coated to improve performance.
You should know that, Barrett warranties the guns for
1 year from purchase and putting these parts in will void warranty due
to alteration.
The gun should be dry fired before taking out the bolt
carrier group.
Your complete bolt assembly upside down with cocking lever and sear
assembly that will be installed above.
1. Pull pin to
remove cocking lever
2. Picture
shows cocking lever removed and orientation of spring assembled on new
cocking lever
4. Pull pin
and remove sear assembly
5. Removing
sear assembly (simply lift straight upwards)
6. Picture
showing all removed parts
7. Push down
on sear assembly and reinstall pin
8. Picture
shows sear assembly installed and pin reinstalled
9. Reinstall
cocking lever (picture shows proper orientation of spring)
10. Push
retaining pin back through cocking lever
11. You have
now completely changed over your cocking lever and sear assembly
and it should
now look like this.
12. If you are
buying these from me on an exchange basis, these are the parts you now
send back to me.
|
